Hardinge L18 Quick Change Tool Post + 3 Holders

This is a used Quick Change Tool Post & Holders Set in GREAT condition. Pieces Included: (1) L-18 Quick Change Tool Post (1) L-19 Cutoff Tool Holder (2) L-21 Single Tool Holder. Comes as shown in pictures. The item "HARDINGE L18 QUICK CHANGE TOOL POST + 3 HOLDERS" is in sale since Tuesday, April 21, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post". The seller is "the_machinists_dream" and is located in San Diego, California. This item can be shipped worldwide. ...

Quick Change Tool Post For Unimat Lathe Db200 /sl1000

  Quick Change Tool Post Sets for Unimat DB200 and SL1000. Tired of shimming your tool bit to get the right height for your tool bits? Long set up time to switch from one tool bit to another? QCTP was designed specifically for Unimat DB200/SL1000 lathe. The set comes with five tool holders to hold 1/4" tool bits, 5/16" tool bits, 3/8 diameter boring bar. Cut Off Tool Holder to hold 1/16" X 3/8" Cut Off Blade and. A Dremel holder for 300 Series Dremel. Raising block is included to raise the tool post by 20.0 mm. 787 to accommodate lathe with a head rising block. T' nut to mount the QCTP...

Aloris Ca Tool Post, 14 20 Lathe Swing Toolpost, Quick-change Wedge Style

Base: Approximately 2.9" square x 1/2" Step x 1.25 OAH. Well maintained, operates smoothly and holds firm. Tightening nut not threading off at top, screw tip might need a quick chase. The item "Aloris CA Tool Post, 14 20 Lathe Swing Toolpost, Quick-Change Wedge Style" is in sale since Friday, June 5, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post". The seller is "toolingcrib" and is located in Troy, Michigan. This item can be shipped to United States. Country/Region of ...

Ea Wedge Quick Change Tool Post Extra Large For 24 Swing Plus

   EA JUMBO SIZE TOOL POST FOR LARGE LATHES 24 SWING+. SEE MY OTHER LISTINGS FOR ALORIS AND ENCO TOOLHOLDERS THAT FIT THIS POST. 1-1/4 SCREW, YOU WILL NEED TO MAKE A BOTTOM NUT TO FIT YOUR LATHE, NOT INCLUDED. Contact for clarification if this is unclear. Look at ALL of the photos. Jelly on the right side of the listing page, then contact member link on the left side of the next page. COMMERCIAL ADDRESS MEANS A LICENSED BUSINESS WITH A SIGN OUT FRONT AND DOCK OR LIFT. For our location google 30527 or industrialtoolandmachineworks. If damaged in transit you will need to file the claim. ...

6 Piece Kdk Style-200 Quick Change Tool Post & Holder Set (3900-5427)

   AIR, POWER & HAND TOOLS. Thank you for shopping with us! 6 Piece KDK Style 200 Quick Change Tool Post & Holder Set Interchangeable with KDK-200 Series. All working parts hardened and ground. Lathe Swing: 18-24" Lock Down Bolt Diameter: 5/8" Includes holders: No. 1 - Turning & Facing, No. 2 - Threading & Facing, No. 3 - Extension Turning Bar, No. 4 - Parting Bar, No. 5 - Master Bar For Boring Bars Also includes a KDK-200 style tool post body. T-slot nut & mounting bolt not included. Some browsers do not allow this option. The item "6 PIECE KDK STYLE-200 QUICK ...

Aloris Cxa22 Cxa-22 Quick Change Tool Post Holder

  ALORIS CXA22 CXA-22 QUICK CHANGE TOOL POST HOLDER. The item "ALORIS CXA22 CXA-22 QUICK CHANGE TOOL POST HOLDER" is in sale since Wednesday, February 19, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post". The seller is "wassaboxerman" and is located in Sterling Heights, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, ...

Taig Lathe Quick Change Tool Post

   Quick Change Tool Post Sets for Taig Lathe. The set comes with five tool holders to hold 1/4" tool bits, 5/16" tool bits, 3/8 diameter boring bar. Cut Off Tool Holder to hold 1/16" X 3/8" Cut Off Blade and. A Dremel holder for 300 Series Dremel (3/4-12 thread). Parts are made from Aluminum 6061-T6. Machined and hand assembled in the USA. Tool holder dimensions: 3/4" X 3/4" X 1 3/4. Tool Post Outside Dimensions: 1.5"W X 1.5"L X 1.90 Overall Height. Note: Tool Bit, Dremel and Taig Lathe are not included in this listing. The item "Taig Lathe Quick Change Tool Post" is in sale since...

Genuine Aloris Cxa22 Cxa-22 Quick Change Tool Post Holder Machinist Metal Lathe

   THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. I do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior. The item "GENUINE ALORIS CXA22 CXA-22 QUICK CHANGE TOOL POST HOLDER MACHINIST METAL LATHE" is in sale since Saturday, June 13, 2020. This ...

Pages