Tool post size = max 55mm height x 73mm width x 82mm length (height including tool post lever post = 65mm) Tool post bolt hole = 10.5mm can be drilled to size upto 20mm to suit lathe Square tool holder = 38mm height x 38mm width x 90mm length height does not include tool holder adjusters will hold tool 8mm to 20mm Boring bar tool holder = 38mm height x 38mm width x 85mm length height does not include tool holder adjusters will hold boring bar from 10mm to 20mm Contents = 1x 40 position tool post holder 1x tool post lever 3x Square tool holders 1x boring bar holder 1x tool holder box key...

   A Fellow I have known for many years has recently decided to down size his machine shop. He had accumulated multiples of much of his tooling so as he sorts through it, any duplicate and/or no longer needed tooling will be released for disposition. I will list these items as they are released for sale. I describe the tools as accurately as possible but sale is final, so please feel free to ask any questions that you might have. Offered here is an Aloris CXA size Quick Change Tool Post. This has the piston type tool clamp and the tool post looks to function as it should. There ...

   A Fellow I have known for many years has recently decided to down size his machine shop. He had accumulated multiples of much of his tooling so as he sorts through it, any duplicate and/or no longer needed tooling will be released for disposition. I will list these items as they are released for sale. I describe the tools as accurately as possible but sale is final, so please feel free to ask any questions that you might have. Offered here is an Aloris CXA size quick change tool post which has the Wedge Type Tool Clamp. The holder comes with an 8 piece set of Aloris Brand Quick ...

   Set consists of the following items. Interchangeable with Aloris, Phase II, Dorian, Yuasa. Suitable for lathe center height 0.60 - 1.75 (top compound surface to lathe centerline), such as. South Bend 9" & 10". All parts are hardened, ground, and completely sealed for maintenance-free operation. Quick change QC tool post sets advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on an engine bench or turret lathe quick change QC tool post sets perform a wide range of ...

   An be used on C06230 lathe which turning diameter is from 200mm to 400mm. (8" to 16" swing lathe). 1 X E5 multifix tool post and locking wrench. 3 X turning facing tool holders ED20100. Shank height 20mm (4/5)turning facing tool. 1 X boring tool holder EH30100. 1 X T wrench for tool holder. 1 X Operation Manual in English. Package carton size is 31X23X18CM. Net weight is 7.8KGS. Gross weight is 8.4KGS(18.6LBS). We also sell E tool post with ED25100 turning facing tool holders kit. Shank height 25mm (1) turning tool. The item "Multifix Quick Change Tool Post & Holders Type E ...

   Hope you have a good shopping experience! AXA Size 250-100 Set Piston Type Quick Change Tool Post Set for Lathe 6- 12 USA. No time wasted with shims. All working parts hardened and precision ground. Wedge type tool post are precision engineered to assure repeatability accuracy. Wedge type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line) , such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10 &11 Nardini TT1000 & TT1200 and many other import lathes. ...

   CXA Wedge Type Quick Change Tool Post Set 250-333 for Lathe 13- 18. 250-333 Wedge Type Tool Post. 250-301 Turning Tool Holder , use tool bit up to 3/4. 250-302 Boring, Turning Tool Holder, use tool bit up to 3/4" and round shank tool bits up to 3/4". 250-304 Heavy Duty Boring Bar Holder, use 3/4 and 1 shank boring bars. 250-307 Parting Blade Tool Holder, use 3/4 high parting blades. 250-310 Knurling and Turning Tool Holder. Suitable for lathe Swing Diameter 13 - 18" (lathe center height 1.125 - 2.125" top compound surface to lathe center line). All working parts hardened and ...

   Quick Change Tool Post - Wedge Type. Centerline to Handle Edge (Inch). Tool Post T-Nut may require machining. This listing is for One Swing Wedge Type Quick Change Tool Post that is in the picture as well as described. This item is missing the handle that screws into the post. This sale is for what is pictured. The item "Phase II 17 to 48 Lathe Swing Wedge Type Quick Change Tool Post 250-555" is in sale since Thursday, September 17, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change...

   Quick Change Tool Post - Wedge Type. Centerline to Handle Edge (Inch). Item is in excellent condition. Does not come with original packaging. Please Refer to our Pictures and description. This listing is for One Wedge Type Quick Change Tool Post that is in the picture as well as described. Comes exactly as shown in photos. The item "Aloris Wedge Type Quick Change Tool Post 14 to 20 Lathe Swing CA" is in sale since Wednesday, September 30, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & ...

This is a CXA Wedge Type Quick-Change Lathe Tool Post. Appears to be an import style tool post, see pictures. For lathes with 13" to 18" swing. Overall Dimensions: 3-1/2" x 3-1/2" x 5-7/8 high. Comes exactly as shown in pictures. The item "13 to 18 CXA TYPE QUICK CHANGE LATHE TOOL POST" is in sale since Monday, September 14, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post". The seller is "xpresstoolsinc" and is located in Covina, California. This item can be shipped to ...