A / A1 QUICK CHANGE TOOL POST - MULTIFIX 40 POSITION. A / A1 For Lathe Swing - 150mm To 300mm Mounting Bore - 20mm (10.2mm) Block Height - 54mm. Standard Holder / Turning & Facing Holder - 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 10 x Standard Holders /. (A1D2090) - 20mm Holding Capacity. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6"-12"). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special ...

   A / A1 QUICK CHANGE TOOL POST - MULTIFIX 40 POSITION. A / A1 For Lathe Swing - 150mm To 300mm Mounting Bore - 20mm (10.2mm) Block Height - 54mm. Standard Holder - 20mm Holding Capacity Boring Holder - 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 3 x Standard Holders (A1D2090) - 20mm Holding Capacity 1 x Boring Holder (AIB2090). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6"-12"). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily ...

   A / A1 QUICK CHANGE TOOL POST - MULTIFIX 40 POSITION. A / A1 For Lathe Swing - 150mm To 300mm Mounting Bore - 20mm (10.2mm) Block Height - 54mm. Standard Holder - 20mm Holding Capacity Boring Holder - 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 3 x Standard Holders (A1D2090) - 20mm Holding Capacity 1 x Boring Holder (AIB2090). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6"-12"). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is ...

Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6"-12"). One set A1 includes: 1 X 540-100 tool post and locking wrench. 9 X turning facing tool holders A1D2090. Can hold 20 MM (20/25"=0.8") shank turning tool. Will hold tool 8mm to 20mm. Boring turning facing tool holder A1B2090. 1 X Tool Clamping T wrench. The spline of the tool holders are EDM cut, not fine ground. Canada, USA and some European countries like France, Norway, ...

Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6"-12"). One set A1 includes: 1 X 540-100 tool post and locking wrench. Basic body is made of high-quality steel which is hardened and ground. The tool holder is clamped against the basic body by an eccentric cam system The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder. Quick-change tool holders are characteried by their unlimited ...

   Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6"-12"). One set A1 includes: 1 X 540-100 tool post and locking wrench. 10 X turning facing tool holders A1D2090. Can hold 20 MM (20/25"=0.8") shank turning tool. Will hold tool 8mm to 20mm. 1 X Tool Clamping T wrench. The spline of the tool holders are EDM cut, not fine ground. Canada, USA and some European countries like France, Norway, etc. PLEASE REFER TO DIAGRAM IN PICTURE ...

   Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6"-12"). One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning facing tool holders A1D2090. Can hold 20 MM (20/25"=0.8") shank turning tool. Will hold tool 8mm to 20mm. 1 X boring turning facing tool holder A1B2090. 1 X Tool Clamping T wrench. The spline of the tool holders are EDM cut, not fine ground. Canada, USA and some European countries like France, ...

   1 5 PIECE MULTIFIX QUICK CHANGE TOOLPOST SET. Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6"-12"). One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning facing tool holders A1D2090. Can hold 20 MM (20/25"=0.8") shank turning tool. Will hold tool 8mm to 20mm. 1 X boring turning facing tool holder A1B2090. 1 X Tool Clamping T wrench. The spline of the tool holders are EDM cut, not fine ground. ...

   Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6"-12"). One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning facing tool holders A1D2090. Can hold 20 MM (20/25"=0.8") shank turning tool. Will hold tool 8mm to 20mm. 1 X boring turning facing tool holder A1B2090. 1 X Tool Clamping T wrench. The spline of the tool holders are EDM cut, not fine ground. Canada, USA and some European countries like ...

Type A quick change tool post holder is made of 45# steel. Swing 150-300mm lathe, such as WM210, BV20, BL220. The item "A type Quick change tool post for swing 150-300mm Lathe with AD2090 and AH 2085" is in sale since Wednesday, May 19, 2021. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post". The seller is "wluc_7" and is located in Chizhou. This item can be shipped worldwide. Custom Bundle: No MPN: Does Not Apply Brand: Unbranded Tool Post Type: Quick Change Tool Post - ...