unimat

Quick Change Tool Post For Emco Unimat 3/4

1x 10mm boring bar holder. 1x knurling and facing holder. The item "Quick Change Tool Post For Emco Unimat 3/4" is in sale since Wednesday, July 29, 2020. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes". The seller is "jolgr3162" and is located in Mountain Ash. This item can be shipped worldwide.   

Quick Change Tool Post For Unimat Lathe Db200 /sl1000

   Quick Change Tool Post Sets for Unimat DB200 and SL1000. Tired of shimming your tool bit to get the right height for your tool bits? Long set up time to switch from one tool bit to another? QCTP was designed specifically for Unimat DB200/SL1000 lathe. The set comes with five tool holders to hold 1/4" tool bits, 5/16" tool bits, 3/8 diameter boring bar. Cut Off Tool Holder to hold 1/16" X 3/8" Cut Off Blade and. A Dremel holder for 300 Series Dremel. Raising block is included to raise the tool post by 20.0 mm. 787 to accommodate lathe with a head rising block. T' nut to mount the...

Quick Change Tool Post For Emco Unimat 3/4

1x 10mm boring bar holder. 1x knurling and facing holder. The item "Quick Change Tool Post For Emco Unimat 3/4" is in sale since Wednesday, July 22, 2020. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes". The seller is "jolgr3162" and is located in Mountain Ash. This item can be shipped worldwide.   

Quick Change Tool Post For Unimat Lathe Db200 /sl1000

  Quick Change Tool Post Sets for Unimat DB200 and SL1000. Tired of shimming your tool bit to get the right height for your tool bits? Long set up time to switch from one tool bit to another? QCTP was designed specifically for Unimat DB200/SL1000 lathe. The set comes with five tool holders to hold 1/4" tool bits, 5/16" tool bits, 3/8 diameter boring bar. Cut Off Tool Holder to hold 1/16" X 3/8" Cut Off Blade and. A Dremel holder for 300 Series Dremel. Raising block is included to raise the tool post by 20.0 mm. 787 to accommodate lathe with a head rising block. T' nut to mount the QCTP ...

Quick Change Tool Post For Emco Unimat 3/4

1x 10mm boring bar holder. 1x knurling and facing holder. The item "Quick Change Tool Post For Emco Unimat 3/4" is in sale since Friday, June 26, 2020. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes". The seller is "jolgr3162" and is located in Mountain Ash. This item can be shipped worldwide.   

Quick Change Tool Post For Unimat Lathe Db200 /sl1000

  Quick Change Tool Post Sets for Unimat DB200 and SL1000. Tired of shimming your tool bit to get the right height for your tool bits? Long set up time to switch from one tool bit to another? QCTP was designed specifically for Unimat DB200/SL1000 lathe. The set comes with five tool holders to hold 1/4" tool bits, 5/16" tool bits, 3/8 diameter boring bar. Cut Off Tool Holder to hold 1/16" X 3/8" Cut Off Blade and. A Dremel holder for 300 Series Dremel. Raising block is included to raise the tool post by 20.0 mm. 787 to accommodate lathe with a head rising block. T' nut to mount the QCTP...

Unimat 3 Quick Change Tool Post

   Quick Change Tool Post Sets for Unimat 3. The set comes with four tool holders to hold 1/4" tool bits, 5/16" tool bits, 3/8 diameter boring bar and a Dremel Holder for 300 Series Dremel. T' nut to mount the QCTP to lathe carriage also included. Parts are made from Aluminum 6061-T6. Proudly made in the USA. Tool holder dimensions: 3/4" X 3/4" X 1 3/4. Tool Post Outside Dimensions: 1.5"W X 1.5"L X 1.50 Overall Height. Note: Tool Bit, Dremel and Lathe are not included. The item "Unimat 3 Quick Change Tool Post" is in sale since Friday, June 5, 2020. This item is in the category "Business...

Quick Change Tool Post For Unimat Lathe Db200 /sl1000

Quick Change Tool Post for Unimat Lathe DB200 /SL1000. This set was only used once during my Unimat DB redesign/upgrade project. The item "Quick Change Tool Post for Unimat Lathe DB200 /SL1000" is in sale since Monday, June 8, 2020. This item is in the category "Collectibles\Tools, Hardware & Locks\Tools\Machining". data" and is located in Phoenix, Arizona. This item can be shipped to United States. Modified Item: No Country/Region of Manufacture: United States Industry Type: Machining   

Quick Change Toolpost For Emco Unimat 3/4

Specifications: Material-Stell Colour-Black Package Includes: 1x Tool Post 4x holders - max. Tool 12mm x 12mm 1x 1MT Morse taper holder 1x Cuter holder - 0.3-6mm drill chuck keyless 1x 10mm boring bar holder 1x 12mm boring bar holder Please look on my other listings for different tools. The item "Quick Change Toolpost For Emco Unimat 3/4" is in sale since Saturday, May 23, 2020. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes". The seller is "janu3724" and is located in Mountain Ash. This item ...

Quick Change Tool Post For Unimat Lathe Db200 /sl1000

   Quick Change Tool Post Sets for Unimat DB200 and SL1000. Tired of shimming your tool bit to get the right height for your tool bits? Long set up time to switch from one tool bit to another? QCTP was designed specifically for Unimat DB200/SL1000 lathe. The set comes with five tool holders to hold 1/4" tool bits, 5/16" tool bits, 3/8 diameter boring bar. Cut Off Tool Holder to hold 1/16" X 3/8" Cut Off Blade and. A Dremel holder for 300 Series Dremel. Raising block is included to raise the tool post by 20.0 mm. 787 to accommodate lathe with a head rising block. T' nut to mount the QCTP to...

Pages