quick-change

9 Pieces Set T37 Quick-change Tool Post With 6 Standard, 1 Vee, 1 Parting Holders

   Torrens high power magnetic tools. T37 Quick change toolpost set. Premium Quality Quick change Tool Post for lathes. All parts hardened and precisely ground. Main Block Size is 58 x 58 x 40 mm high with a (11.5 mm) Stud Bore. 1 x 3/32x1/2x4 HSS Parting Blade. Tool capacity upto 13 mm approx. This toolpost is suitable for 5/16 (8mm) or 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools. Set comes complete with 6 standard holders + 1 Boring Vee Holder + 1 vee holder and 1 Hex Spanner. Tool capacity upto 12.5mm approx. Our product is manufactured by ...

Kdk 00 Series Quick-change Tool Post + 6 Holders Jewlers Lathe Tool

   (Jack) Kuhn of South Gate, California. This is a used KDK 00 Series Quick-Change Tool Post with 6 Holders + Accessories in PRISTINE condition. This came off a jewelers lathe, and are EXTREMELY RARE sets. Some of these pieces look as though they haven't even been used. Very well taken care of set. Set is missing the cut off blade all the way to the right on the first photo. Must have misplaced that piece. Otherwise it comes exactly as shown. All holders and tool post included. Series #: 00 / JL. Only a second to change tools. Rugged - No chatter or vibration. No time wasted with ...

7 Pieces Set T37 Quick-change Tool Post With 4 Standard, 1 Vee, 1 Parting Holders

   Torrens high power magnetic tools. T37 Quick change toolpost set. Premium Quality Quick change Tool Post for lathes. All parts hardened and precisely ground. Main Block Size is 58 x 58 x 40 mm high with a (11.5 mm) Stud Bore. 1 x 3/32x1/2x4 HSS Parting Blade. Tool capacity upto 13 mm approx. This toolpost is suitable for 5/16 (8mm) or 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools. Set comes complete with 4 standard holders + 1 Boring Vee Holder + 1 vee holder and 1 Hex Spanner. Tool capacity upto 12.5mm approx. Our product is ...

T37 Quick-change Toolpost Myford Ml7 9 Pcs Set 6 Standard, 1 Vee, 1 Parting

   Torrens high power magnetic tools. T37 Quick change toolpost set. Premium Quality Quick change Tool Post for lathes. All parts are precisely ground. Main Block Size is 58 x 58 x 36 mm high with a (11.5 mm) Stud Bore. 1 x 3/32x1/2x4 HSS Parting Blade. Tool capacity upto 13 mm approx. This toolpost is suitable for 5/16 (8mm) or 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools. Set comes complete with 6 standard holders + 1 Boring Vee Holder + 1 Parting holder and 1 Hex Spanner. Tool capacity upto 12.5mm approx. Our product is manufactured by us, we ...

9 Pieces Set T37 Quick-change Tool Post With 6 Standard, 1 Vee, 1 Parting Holders

   Torrens high power magnetic tools. T37 Quick change toolpost set. Premium Quality Quick change Tool Post for lathes. All parts hardened and precisely ground. Main Block Size is 58 x 58 x 40 mm high with a (11.5 mm) Stud Bore. 1 x 3/32x1/2x4 HSS Parting Blade. Tool capacity upto 13 mm approx. This toolpost is suitable for 5/16 (8mm) or 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools. Set comes complete with 6 standard holders + 1 Boring Vee Holder + 1 vee holder and 1 Hex Spanner. Tool capacity upto 12.5mm approx. Our product is manufactured by us,...

Toolpost T37 Quick-change Myford Ml7, Ml10 5 Pieces Set

   Torrens high power magnetic tools. T37 Quick change toolpost set. Premium Quality Quick change Tool Post for lathes. All parts hardened and precisely ground. Main Block Size is 58 x 58 x 37 mm high with a 11.5mm Stud Bore. 1 x 3/32x1/2x4 HSS Parting Blade. Tool capacity upto 13 mm approx. This toolpost is suitable for 5/16 (8mm) or 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools. Set comes complete with 2 standard holders + 1 Boring Vee Holder + 1 Parting holder and 1 Hex Spanner. Tool capacity upto 12.5mm approx. Our product is manufactured ...

5 Pieces Set T37 Quick-change Toolpost Myford Ml7 Center 90-115

   Torrens high power magnetic tools. T37 Quick change toolpost set. Premium Quality Quick change Tool Post for lathes. All parts hardened and precisely ground. Main Block Size is 58 x 58 x 40 mm high with a 7/16 (11.1 mm) Stud Bore. 1 x 3/32x1/2x4 HSS Parting Blade. Tool capacity upto 13 mm approx. This toolpost is suitable for 5/16 (8mm) or 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools. Set comes complete with 3 standard holders + 1 Boring Vee Holder and 1 Hex Spanner. Tool capacity upto 12.5mm approx. Our product is manufactured by us, we...

T37 Quick-change Toolpost Myford Ml7 5 Pieces Set With Wooden Box Premium

   Torrens high power magnetic tools. T37 Quick change toolpost set. Premium Quality Quick change Tool Post for lathes. All parts are precisely ground. Main Block Size is 58 x 58 x 37 mm high with a 11.5mm Stud Bore. 1 x 3/32x1/2x4 HSS Parting Blade. Tool capacity upto 13 mm approx. This toolpost is suitable for 5/16 (8mm) or 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools. Set comes complete with 2 standard holders + 1 Boring Vee Holder + 1 Parting holder and 1 Hex Spanner. Tool capacity upto 12.5mm approx. Our product is manufactured by us, we do ...

8 Pieces Set T37 Quick-change Toolpost Myford Standard Boring And Parting Holder

   T37 Quick Change Tool Post. 1 Boring Bar / Vee Holder. The Quick Change Tool Post is arranged for mounting across the two rearmost tee slots of the longer cross slide as fitted to all Myford Lathes. The Quick Change Interchangeable Tooling Set has been designed to offer the rapid changeover of tools with precision repeat-ability. It is easily fitted to the lathe and setting time is reduced as the need to find and position suitable packing pieces is eliminated. All parts hard & Ground with Chamfer at edges for safe working. This fits to all Myford & similar Lathe machine, ...

T37 Quick-change Tool Post Myford Ml7 Set Of 5 Pc With Wooden Box

   T37 Quick Change Tool Post. The Quick Change Tool Post is arranged for mounting across the two rearmost tee slots of the longer cross slide as fitted to all Myford Lathes. The Quick Change Interchangeable Tooling Set has been designed to offer the rapid changeover of tools with precision repeat-ability. It is easily fitted to the lathe and setting time is reduced as the need to find and position suitable packing pieces is eliminated. All parts hard & Ground with Chamfer at edges for safe working. This fits to all Myford & similar Lathe machine, suitable for 90-115 mm Center ...

Pages