Stantec Sales & Services is Offering the Following Equipment. Hahn-Kolb Lathe 40 Position Quick Change Tool Post With 2 Holders BIG LATHE. Does not have center bolt or t nut for compound. One of the holders height adjustment was broken and brazed see picture. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at any time.   

Multi-Fix Quick Change Tool Post w/ Factory Handle. Considered a Very Sturdy Tool Holder. Rack is 14 X 31/2 in. Tool holder slot will hold up to. This tool set was designed for 10 in or larger lathes. This set basically is similar in sizing to AXA tool posts. This tool post will fit on a factory Emco super 11 stud. Listings could be ended early or at any time as all items are for sale locally, where listings have multiple quantities only the quantity will change.   

   1 5 PIECE MULTIFIX QUICK CHANGE TOOLPOST SET. Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6"-12"). One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning facing tool holders A1D2090. Can hold 20 MM (20/25"=0.8") shank turning tool. Will hold tool 8mm to 20mm. 1 X boring turning facing tool holder A1B2090. 1 X Tool Clamping T wrench. The spline of the tool holders are EDM cut, not fine ground. Canada, ...

   Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line), such as: South Bend 13", 14" & 1307, Delta 14", Logan 14" Emco: Elnomat13S, Harrison: 11,12 &13", Sheldon: 11 &13, Clausing: 1300 series, Monarch: 13, Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. This Wedge type tool post is precision engineered to assure repetitive accuracy. Wedge type tool posts Have the Maximum ridigity to get the chatter free performance. No time wasted with shims. BXA 250-222 Wedge Type Tool Post For Lathe 10 - 15 With 7PC Tool Holders New. All...

For sale is a used Aloris CA Wedge Tool Post, in good usable condition, moves smoothly. T-Nut measures approx 3-1/8 wide x. 475 thick at bottom, 1-3/4" wide x 3/8" at top. Includes 8 Holders, 5 are CA2, 1 is a CA4, 1 is a CA8, 1 is a CA12. All the holder set screws and adjust nuts have been cleaned and oiled and move freely. Please view all pics as they are part of the description. I try to describe most of the items to the best of my ability, there are times when hubby inserts info onto a Post-It-Note that you will see in the pics. Please view all pics, as they are part of the ...

This Yuasa 740-100 Quick Change Tool Post is a great addition to any metalworking shop. It comes complete with two tool holders, 740-101 and 740-104, and is in excellent condition, and comes with original boxes and instructions. The brown stuff you see on the tools is packing grease and will easily clean off. They don't look like been used much if at all. The brand is Yuasa, a well-known name in work holding equipment. It is perfect for those who want to save time and increase efficiency in their machining process. The tool post is compatible with a variety of lathes and is easy to ...

Up for sale a nice, genuine mostly USA made set of Aloris tool post and quick change holders. The following items are included in the sale. Aloris tool post Model AX. Dorian tool D25AXA-881 with NL50-R. D25AXA-1 made in usa dorian tool. D25AXA-7 made in usa dorian tool. D25AXA-2 made in usa dorian tool. All parts are in cosmetically great shape. Spotty surface rust in 3 parts. Please ask any questions about the parts before purchasing.   

   Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line), such as: South Bend 13", 14" & 1307, Delta 14", Logan 14" Emco: Elnomat13S, Harrison: 11,12 &13", Sheldon: 11 &13, Clausing: 1300 series, Monarch: 13, Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. This Wedge type tool post is precision engineered to assure repetitive accuracy. Wedge type tool posts Have the Maximum ridigity to get the chatter free performance. No time wasted with shims. All working parts hardened and precision ground. BXA 250-222 Wedge Type Tool Post ...

Quick Change Tool Post With 5pcs Holders 40 Position for Swing 120-220mm Lathe. Type Aa+ quick change tool post holder is made of 45# steel. It is suitable for swing 120-220mm lathe, such as WM 180V, WM210, ED400FD, BV20, BL220. Return accepted in 30 days after you receive the item. Return package must be in the original packaging, item must be in new condition.   

40 Position Quick Change Tool Post Set for WM210 Lathe with 4 Holders. Aa quick change tool post set the good helper for lathe cessing. Swing 120-220mm lathe, such as. G0768/ WBL 210 /WM180V/ WM210/. Take away the original square holder. Installation is complete, start to use.