Main Block Size is 58 x 58 x 37 mm high with a 7/16 (11.1 mm) Stud Bore. This fits to all Myford & similar Lathe machine, suitable for 90-115 mm Center Height. All parts hard & Ground with Chamfer at edges for safe working.   

This fits to all Myford & similar Lathe machine, suitable for 90-115 mm Center Height. Main Block Size is 58 x 58 x 37 mm high with a 7/16 (11.1 mm) Stud Bore. All parts hard & Ground with Chamfer at edges for safe working.   

Of course, it's possible for unnoticed details to fall through the cracks but for the most part we try to be really careful about this.   

This accessory brings to your Sherline lathe the ability to change tools quickly and easily. The three interchangeable tool holders are designed to hold a 3/8? Round boring bar, a 1/4? HSS cutting tool, and a cut-off blade (cutting tools are not included).   

Main Block Size is 58 x 58 x 37 mm high with a 7/16 (11.3mm) (Approx) Stud Bore. Skylark Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest Indian industrial standards.   

Main Block Size is 58 x 58 x 37 mm high with a 7/16 (11.1 mm) Stud Bore. All parts hard & Ground with Chamfer at edges for safe working. Center bore is 7/16 Tool holder capacity is 13 mm maximum.   

1 x 3/32x1/2x4 HSS Parting Blade Tool capacity upto 13 mm approx. All parts hardened and precisely ground. Main Block Size is 58 x 58 x 40 mm high with a 7/16 (11.1 mm) Stud Bore.   

1 x 3/32x1/2x4 HSS Parting Blade Tool capacity upto 13 mm approx. All parts hardened and precisely ground. Main Block Size is 58 x 58 x 40 mm high with a 7/16 (11.1 mm) Stud Bore.   

Name: Steel wedge quick change tool post. Product introduction: The quick-change tool post is the main accessory of the ordinary lathe. It is composed of a tool post and several tool holders. According to the needs of the workpiece, the corresponding tool holder can be selected. Flower, drilling, reaming, boring, reaming, etc. It realizes the installation of tools outside the machine, and the tool holder is installed on the tool holder through a dovetail groove. It has the characteristics of rapid tool change, high positioning accuracy and strong rigidity. It is an ideal product to ...

T37 Quick Change Tool Post. The Quick Change Tool Post is arranged for mounting across the two rearmost tee slots of the longer cross slide as fitted to all Myford Lathes. The Quick Change Interchangeable Tooling Set has been designed to offer the rapid changeover of tools with precision repeat-ability. It is easily fitted to the lathe and setting time is reduced as the need to find and position suitable packing pieces is eliminated. All parts hard & Ground with Chamfer at edges for safe working. This fits to all Myford & similar Lathe machine, suitable for 90-115 mm Center ...