tool

Aloris Bx Quick Change Tool Post (bxa Size), With 6 Piece Set Of Holders

   Offered here is an Aloris BX Quick Change Tool Post which comes equipped with a set of (6) Quick Change Tool Holders. This holder accepts BX and/or BXA size tool holders. Everything appears to be in good condition and here is my assessment of the set. The Tool Post looks solid and functions as it should. I dropped a tool holder in position and the clamp seemed to work fine. The holders also look clean and in good shape. There are 2 things I noticed and want to point out: The BXA-10 Knurling tool holder has had the face by the knurling rollers slightly ground. Also, on the BX-16 ...

Aloris Axa-5c Quick Change Collet Drilling Holder For Tool Post Made In Usa

   Can be used with a variety of shank tools: Reamers, drills, C bores, taps, end mills, boring bars, and other tools. Includes: Collet Nut and Poker. Ajax E-Bay store supplies the full line of Aloris products. The item "Aloris AXA-5C Quick Change Collet Drilling Holder for Tool Post Made in USA" is in sale since Wednesday, September 9, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post". The seller is "ajaxtoolsupply" and is located in Columbus, Ohio. This item can be shipped to...

Algra Dickson Style Quick Change Tool Post Size A With Toolholders

   Algra "Dickson" style quick change tool post Size A. This is an Italian made "Algra Rapidue" Rapid style quick change tool post with three toolholders included. The tool post is in excellent condition showing little wear but this is a used item. There are two flat bottom tool holders and one is grooved to accommodate round tools. The tool holders are not marked and one is slightly newer. There are a few screws missing on the toolholders as clearly shown in the photos. This "Dickinson" style system offers excellent rigidity and stability. This is a size A system similar to AXA sizing. ...

Original Emco Unimat 3 Lathe Quick Change Tool Post With 11 Tool Posts

ORIGINAL EMCO UNIMAT 3 LATHE QUICK CHANGE TOOL POST WITH 11 TOOL POSTS. CAME FROM A GOOD HOME. The item "ORIGINAL EMCO UNIMAT 3 LATHE QUICK CHANGE TOOL POST WITH 11 TOOL POSTS" is in sale since Wednesday, October 21, 2020. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes". The seller is "lupose2door" and is located in Harrogate. This item can be shipped to United States, European Union member countries, Japan, Canada, Australia. Featured Refinements: Unimat SL Brand: Emco UNIMAT   

Lathe 40 Position Professional Multifix (a1) Type = Quick Change Tool Post Kit

   Tool post size = max 55mm height x 73mm width x 82mm length (height including tool post lever post = 65mm) Tool post bolt hole = 10.5mm can be drilled to size upto 20mm to suit lathe Square tool holder = 38mm height x 38mm width x 90mm length height does not include tool holder adjusters will hold tool 8mm to 20mm Boring bar tool holder = 38mm height x 38mm width x 85mm length height does not include tool holder adjusters will hold boring bar from 10mm to 20mm Contents = 1x 40 position tool post holder 1x tool post lever 3x Square tool holders 1x boring bar holder 1x tool holder box key...

Sherline 2250 Quick-change Tool Post System

   Sherline 2250 Quick-Change Tool Post System. This accessory brings to your Sherline lathe the ability to change tools quickly and easily. It uses a dovetail design to locate removable holders in a fashion similar to that used in production machine shops. Included with the case hardened steel tool post are three interchangeable steel holders designed to hold a 1/4? Diameter boring tool and a Sherline cutoff tool. An optional holder for inserted carbide tips is also available as P/N 2295. Each holder has a knurled brass knob that allows you to easily adjust the height of the tool tip....

Taig Lathe Quick Change Tool Post

   Quick Change Tool Post Sets for Taig Lathe. The set comes with five tool holders to hold 1/4" tool bits, 5/16" tool bits, 3/8 diameter boring bar. Cut Off Tool Holder to hold 1/16" X 3/8" Cut Off Blade and. A Dremel holder for 300 Series Dremel (3/4-12 thread). Parts are made from Aluminum 6061-T6. Machined and hand assembled in the USA. Tool holder dimensions: 3/4" X 3/4" X 1 3/4. Tool Post Outside Dimensions: 1.5"W X 1.5"L X 1.90 Overall Height. Note: Tool Bit, Dremel and Taig Lathe are not included in this listing. The item "Taig Lathe Quick Change Tool Post" is in sale since ...

Aloris Cxa Quick Change Tool Post With Piston Type Tool Clamp With (3) Holders

   A Fellow I have known for many years has recently decided to down size his machine shop. He had accumulated multiples of much of his tooling so as he sorts through it, any duplicate and/or no longer needed tooling will be released for disposition. I will list these items as they are released for sale. I describe the tools as accurately as possible but sale is final, so please feel free to ask any questions that you might have. Offered here is an Aloris CXA size Quick Change Tool Post. This has the piston type tool clamp and the tool post looks to function as it should. There ...

New Myford Quick Change Tool Post Set For Ml7 / Ml7-r / Super 7 Direct Myford

Myford Quickchange Toolpost Set -78175. 1X Hexagon Socket Wrench 78175F. PLEASE NOTE - When Using This Quick Change Toolpost On A Series7 Myford Lathe, You Will Have To Use 8mm Or 10mm Tools, Or On The Series 10 Lathes, 6mm Tools. This Is Because The Cutting Edge Of The Tool Will Be Above Centre Height When Using Bigger Tools. The item "New Myford Quick Change Tool post Set For ML7 / ML7-R / Super 7 Direct Myford" is in sale since Thursday, September 20, 2018. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking ...

Aloris Cxa Quick Change Tool Post, Wedge Type With 8 Piece Set Of Holders

   A Fellow I have known for many years has recently decided to down size his machine shop. He had accumulated multiples of much of his tooling so as he sorts through it, any duplicate and/or no longer needed tooling will be released for disposition. I will list these items as they are released for sale. I describe the tools as accurately as possible but sale is final, so please feel free to ask any questions that you might have. Offered here is an Aloris CXA size quick change tool post which has the Wedge Type Tool Clamp. The holder comes with an 8 piece set of Aloris Brand Quick ...

Pages