40 Position Quick Change Tool Post Set for WM210 Lathe with 4 Holders. Aa quick change tool post set the good helper for lathe processing. Swing 120-220mm lathe, such as. G0768/ WBL 210 /WM180V/ WM210/. Take away the original square holder. All payments are expected within 14. Low price declare and discreect package. Please make sure your address is correct. / United Kingdom / Australia. South Asia / Middle East. Normally, 10-25working days, but sometimes it takes up to 40 days due to the Custom Inspection. Normally, 20-40working days, but sometimes it takes up to 45 days due to the ...

   AXA Wedge Type Quick Change Tool Post for Lathe 6-12. 8.05 x 6.51 x 4.08 inches. Ultrasonic repeller Model BH-1 (OM) Ver. Date First Available: September 25, 2017. Precision-engineered to assure repetitive accuracy. Quickly and easily installed on an engine, bench, or turret lathe for a wide range of operations. Includes axa tool post with rigid wedge design, easily centered; axa #1 turning & facing holder with 3/16-1/2" capacity; axa #2 turning, facing & boring holder with 3/16-1/2" capacity and groove for round tools; axa #4 boring bar holder holds 5/8" tool; axa #7 ...

   No time wasted with shims. All working parts hardened and precision ground. Wedge type tool post are precision engineered to assure repeatability accuracy. Wedge type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line), such as: South Bend 9" & 10", Atlas 10 & 12", Delta 10 &11 Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of. 250-111 Wedge Type Tool Post Swing Dia 12. AXA 250-111 Set Wedge Type Quick Change Tool Post Set ...

Quick Change Tool Posts Wedge CXA 300 Aloris Type. You are purchasing a Quick Change Lathe Tool Post Wedge Type. Working parts hardened & ground. Holders fit Alorris & DORIAN tool posts. Maximum rigidity for chatter-free performance. Size A 3-1/2"; B 5-1/8"; C 3"; D 3/4"; E 1-7/8"; H 6-1/8"; R 7-7/8. Make sure your address is deliverable from post office. Remember 2-3 day service does not count Sunday or holidays. It is not a guaranteed service but has been proved to be highly reliable. Make sure your address is deliverable by post office. At EZ-Accessory , our drive to ...

   No time wasted with shims. All working parts hardened and precision ground. Wedge type tool post are precision engineered to assure repeatability accuracy. Wedge type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line), such as: South Bend 9" & 10", Atlas 10 & 12", Delta 10 &11 Nardini TT1000 & TT1200 and many other import lathes. ALL-CARB AXA 250-111 Set Wedge Type Quick Change Tool Post Set Swing Dia 12. Features: This product comes with best ...

For use with OXA tool post 250-000. 6-8" swing Holds 3/8" with bushing (1/2 diameter without bushing). Interchangeable with Dorian, Aloris, & Phase II OXA series mini tool posts. Grips bar with extreme rigidity; cuts smoothly without chatter Equipped with a split bushing to accommodate a boring bar of smaller diameter Precision ground and hardened Completely sealed for maintenance free operation. Package Including: 4PCS Quick Change TURNING & FACING Lathe Tool Post Holder (250-004) OXA #4. 4Pcs OXA #4 250-004 Quick Change Heavy Duty Boring Bar Tool Post Holder. If there is any ...

JET - 200 Series Quick Change Tool Post Set. Increases productivity of all lathe operations. Set includes one 200BXA series tool post and 5 tool holders (#1 Boring & Facing; #2 Boring, Turning & Facing; #4 Heavy Duty Boring; #7 Universal Paring Blade and #10 Knurling, Facing & Turning). Hardened and ground working parts. Maximum rigidity for chatter-free performance. Holders fit ALLORRIS and YUASA tool posts. Completely sealed for maintenance free operation. Fits 10"-15" swing lathes. Working parts hardened and ground.   

   Description: Quick Change Turning and Facing Lathes Tool Post Holder Use for lathe swing 10-15" piston Type or wedge type tool posts sets 250-201T Oversize Turning Tool Holders, use tool bit up to 3/4" Plenty of working positions for more tool holder. Adjust height of cutting edge easily and accurately. Holder provides maximum rigidity and absence of vibration prevents breaking blades! Completely sealed for maintenance free operation Turning and facing tools can be locked together (saving time and labor when changing operations). Package Included: 10Pcs 250-201T oversize 3/4 ...

   No time wasted with shims. All working parts hardened and precision ground. Wedge type tool post are precision engineered to assure repeatability accuracy. Wedge type tool post Have the Maximum rigidity to get the chatter free performance. Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe center line), such as: South Bend 9" & 10", Atlas 10 & 12", Delta 10 &11 Nardini TT1000 & TT1200 and many other import lathes. Whole set includes one each of. Visit my Store to see new items that you like. 6Pcs AXA 250-100 Size Piston Type Quick Change Tool ...

Germany style 40 Position Q. Ab is a model between AA and A1. Ab is bigger than AA but smaller than A1. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 180 to 330mm(7"--13"), lathe tool top slide width range 75--100mm. One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning tool holders AbD1665. Can hold 16 MM (16/25"=0.64") shank turning tool. Can hold tool tip height min. 1 X boring tool round tool holder AbH1665. 1 X Tool clmaping T wrench. 1 X English operation manual. 1 X 16X20X80MM Parting Off blade Holder. 1 X 2X12X200MM...