C3 40 Position Quick Change Tool Post Kit For 400-700mm Swing Lathe 16" to 28". This listing is C3 Multifix type C. 1 x C3 tool post. Above is about 12.5KGS. Not including the following tool holders. 1.25 SHANK HEIGHT HOLDING CAPACITY. It will be much cheaper.   

   Aa and Eb are the same except for their different materials, (Aa is made of steel, Eb is made of stainless steel) They are more suitable for small lathes such as 0618. Although they can also be used on lathes such as WM210v, this is not a long-term solution. If you want to use it on a lathe like WM210v, I will recommend Ec or Ed, which are specially made for WM210v. The tool holder width of Aa and EB is 50 mm (1.969? If you don't know whether it is suitable for your lathe, you can check whether the width of the square tool holder on your lathe is close to its width. Quick Change...

   Lathe 4 Position Quick Change Manual Tool Post Holder 4-1/2"x4-1/2". Lathe 4 Position Quick Change Manual Tool Post Holder 4-1/2"x4-1/2" N/A. Any item can be picked up at our warehouse in Millersburg free of charge if you would prefer to pick it up yourself or have a courier pick it up. Orders placed before 9 a. Packages weighing less than 150 lbs. If the item needs special preparation, such as crating, reach out to us for a quote. We will not change prices on invoices or mark the package as a gift. If The item is listed as parts or repair, and is not returnable. The 30-day ...

Dorian SD35CXA quick change 2 position tool post including the following two holders. Item has been tested by machinists. Please visit our store for your machinist tooling needs from brands such as Mitutoyo, Starrett, Etalon and others.   

ALORIS CA QUICK CHANGE TOOL POST FOR LATHE 2 POSITION.   

Quick Change Tool Post With 5pcs Holders 40 Position for Swing 120-220mm Lathe. Type Aa+ quick change tool post holder is made of 45# steel. It is suitable for swing 120-220mm lathe, such as WM 180V, WM210, ED400FD, BV20, BL220. Otherwise we can't guarantee the package would arrive smoothly. Return accepted in 30 days after you receive the item. Return package must be in the original packaging, item must be in new condition.   

Nice Dorian DSIT-60 4 Way Position Indexing Turret Tool Post Large Lathe. This tool post is in excellent condition. Top quality, Made in USA. Been sitting around the shop for maybe 10 years. This is a big turret. It was slated to go on a 25 lathe. I believe the 60 series were suggested for 25-32 machines. CCan accept up to 1 1/2 tool holders. No handle, you'll need to spin one up on the lathe. The knobs are available at McMaster-Carr.   

40 Position A Series Quick Change Tool Post. All available holders for this set are interchangeable with most A, E and B 40-position tool posts.   

Germany style 40 Position Q. Canada, USA and some European countries like France, Norway, etc. 4.4kgs/set (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6"--12"), lathe tool top slide width range 75--100mm. On the photo you can see A1 we installed on 210mm swing bench lathe. One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning facing tool holders AD1675. Can hold 16 MM (16/25"=0.63") shank turning tool. Can hold tool tip height min. 8 MM (8/25"=0.32"). 1 X ...

AIR, POWER & HAND TOOLS. Thank you for shopping with us! 40 Position E Series Quick Change Tool Post All available holders for this set are interchangeable with most A, E and B 40-position tool posts. Some browsers do not allow this option.