Quick Change Tool Post Set 0XA Steel Mini Lathe 7x10 7x12 Wedge Type Shim Free. Upgrade your mini lathe with this quick change tool post set for 7 x 10 to 7 x 14 inch lathes. Swap tools faster and skip the shims. Key Features - Shim-free setup saves time - change tools without stacking shims - Five holders included - turning, boring, facing, parting blade, knurling - Wedge type design holds repeatable accuracy across tool changes - Fits 6-9 inch swing lathes - check your lathe before ordering. Quick Specs - Type: Quick change tool post set - Holders: No. 10 - Bottom plate: 44 x 40 x 8 mm - ...

   This is a 4 piston Mini Quick change tool post, and three tool holders. All parts are made of STEEL. I bought one of the aluminum ones for my 7X14 Grizzly G0765 lathe, and was very disappointed with it. So I built my own, and it works great. So I've decided to offer it to others. It is a four piston, so it holds the tool holder more securely. The single piston type, if your trying to clamp the holder high, or low, it try's to twist the holder. And the sloppy fitting dove tales on the aluminum tool posts make it even worse. Not with a four piston. It will work on a 7X10, 7X12 ...

   This is a 4 piston Mini Quick change tool post, and three tool holders. All parts are made of STEEL. I bought one of the aluminum ones for my 7X14 Grizzly G0765 lathe, and was very disappointed with it. So I built my own, and it works great. So I've decided to offer it to others. It is a four piston, so it holds the tool holder more securely. The single piston type, if your trying to clamp the holder high, or low, it try's to twist the holder. And the sloppy fitting dove tales on the aluminum tool posts make it even worse. Not with a four piston. It will work on a 7X10, 7X12 or ...

   This is a 4 piston Mini Quick change tool post, and three tool holders. All parts are made of STEEL. I bought one of the aluminum ones for my 7X14 Grizzly G0765 lathe, and was very disappointed with it. So I built my own, and it works great. So I've decided to offer it to others. It is a four piston, so it holds the tool holder more securely. The single piston type, if your trying to clamp the holder high, or low, it try's to twist the holder. And the sloppy fitting dove tales on the aluminum tool posts make it even worse. Not with a four piston. It will work on a 7X10, ...

   This is a 4 piston Mini Quick change tool post, and three tool holders. All parts are made of STEEL. I bought one of the aluminum ones for my 7X14 Grizzly G0765 lathe, and was very disappointed with it. So I built my own, and it works great. So I've decided to offer it to others. It is a four piston, so it holds the tool holder more securely. The single piston type, if your trying to clamp the holder high, or low, it try's to twist the holder. And the sloppy fitting dove tales on the aluminum tool posts make it even worse. Not with a four piston. It will work on a 7X10, 7X12 ...

   This is a 4 piston Mini Quick change tool post, and three tool holders. All parts are made of STEEL. I bought one of the aluminum ones for my 7X14 Grizzly G0765 lathe, and was very disappointed with it. So I built my own, and it works great. So I've decided to offer it to others. It is a four piston, so it holds the tool holder more securely. The single piston type, if your trying to clamp the holder high, or low, it try's to twist the holder. And the sloppy fitting dove tales on the aluminum tool posts make it even worse. Not with a four piston. It will work on a 7X10, 7X12 or ...

   This is a 4 piston Mini Quick change tool post , and three tool holders. All parts are made of STEEL. I bought one of the aluminum ones for my 7X14 Grizzly G0765 lathe, and was very disappointed with it. So I built my own, and it works great. So I've decided to offer it to others. It is a four piston, so it holds the tool holder more securely. The single piston type, if your trying to clamp the holder high, or low, it try's to twist the holder. And the sloppy fitting dove tales make it even worse. Not with a four piston. It will work on a 7X10, 7X12 or 7X14 mini lathes. It ...

   This is a 4 piston Mini Quick change tool post , and three tool holders. All parts are made of STEEL. I bought one of the aluminum ones for my 7X14 Grizzly G0765 lathe, and was very disappointed with it. So I built my own, and it works great. So I've decided to offer it to others. It is a four piston, so it holds the tool holder more securely. The single piston type, if your trying to clamp the holder high, or low, it try's to twist the holder. And the sloppy fitting dove tales make it even worse. Not with a four piston. It will work on a 7X10, 7X12 or 7X14 mini lathes. It may...

   This is a 4 piston Mini Quick change tool post , and three tool holders. All parts are made of STEEL. I bought one of the aluminum ones for my 7X14 Grizzly G0765 lathe, and was very disappointed with it. So I built my own, and it works great. So I've decided to offer it to others. It is a four piston, so it holds the tool holder more securely. The single piston type, if your trying to clamp the holder high, or low, it try's to twist the holder. And the sloppy fitting dove tales make it even worse. Not with a four piston. It will work on a 7X10, 7X12 or 7X14 mini lathes. It may ...

   This is a 4 piston Mini Quick change tool post , and three tool holders. All parts are made of STEEL. I bought one of the aluminum ones for my 7X14 Grizzly G0765 lathe, and was very disappointed with it. So I built my own, and it works great. So I've decided to offer it to others. It is a four piston, so it holds the tool holder more securely. The single piston type, if your trying to clamp the holder high, or low, it try's to twist the holder. And the sloppy fitting dove tales make it even worse. Not with a four piston. It will work on a 7X10, 7X12 or 7X14 mini lathes. It may work ...