Change Tool Post

   Quick Change Tool Post Sets for Sherline Lathe. The set comes with five tool holders to hold 1/4" tool bits, 5/16" tool bits, 3/8 diameter boring bar. Cut Off Tool Holder to hold 1/16" X 3/8" Cut Off Blade and. A Dremel holder for 300 Series Dremel (3/4-12 thread). Parts are made from Aluminum 6061-T6. Machined and hand assembled in the USA. Tool holder dimensions: 3/4" X 3/4" X 1 3/4. Tool Post Outside Dimensions: 1.5"W X 1.5"L X 2.05 Overall Height. Note: Tool Bit, Dremel and Sherline Lathe are not included in this listing. The item "Sherline Lathe Quick Change Tool Post" is in ...

1x 10mm boring bar holder. 1x knurling and facing holder. 1x 1MT Morse taper holder. The item "Quick Change Tool Post For Emco Unimat SL/DB" is in sale since Sunday, September 13, 2020. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes". The seller is "jolgr3162" and is located in Mountain Ash. This item can be shipped worldwide.   

   Phase II part number 251-222 wedge style tool post with 5 holders. This is a six piece set that includes the quick change tool post and 5 holders (holder 1, holder 2, holder 4, holder 7, and holder 10). This design is based off of the Aloris BXA series and is sized to fit lathes with a 10"-15" swing. This is the more accurate wedge style, not the cheaper piston model. This item is 100% brand new. Note: The tool post T-nut MUST be machined to match your lathe's compound rest. T-slot dimensions are not standard and vary widely among lathe manufacturers. Note on condition: This listing is ...

   Armstrong Brand New Made in USA 3.50" (D) CXA 81-013 Quick-Change Wedge Type Lathe Precision Tool Post (13" to 19 Swing), Easily Installed on Lathe (Bench, Turret or Engine Type). Gib Type Quick Change Tool Post The ultimate for precision lathe work in tool rooms and for short-run production. Sliding gib locking design is the most accurate tool holder positioning system on market. All moving parts are scientifically hardended for long life, and all bearing surfaces are precision ground afer hardening. Finished in black oxide and mirror chrome plate. Aloris Tool Holders, Series No. CXA, ...

   Aloris CXA #10 Quick Change Knurling Holder. For knurling as well as turning & facing. Supplied with a set of high speed precision ground and lapped medium diamond knurls. AXA Lathe Swings 0 - 12" BXA Lathe Swings 10" - 15" CXA Lathe Swings 13" - 18" CA Lathe Swings 14" - 20" DA Lathe Swings 17" - 48. Aloris Part # AXA-10 Aloris Part # BXA-10 Aloris Part # CXA-10 Aloris Part # CA-10 Aloris Part # DA-10. Ajax E-Bay store supplies the full line of Aloris Products. Need any help looking please call. The item "Aloris CXA-10 Quick Change Knurling Holder for Tool Post Made In USA" is in ...

Aloris Quick Change CXA Tool Post with T-Base 13"-18" Swing. Base may need to be machined to suit your machine but currently measures. 748" thick 2-1/2" wide x 3" long with T-Width at 1.54" wide x. Please use pictures as part of the description. The item "Aloris Quick Change CXA Tool Post with T-Base 13-18 Swing" is in sale since Sunday, September 13, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post". The seller is "leop29" and is located in Hermitage, Pennsylvania....

  Unknown brand BXA tool post. This is 100% not a Bostar, Shars, or other cheap import. Im inclined to think its an Aloris because of how heavy and stout it is, but I cannot confirm that. It has no markings on it to identify anything. My genuine Aloris tool holders fit on it just fine. Mechanism works flawlessly as it should. The item "Bxa quick change tool post" is in sale since Saturday, September 5, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post". The seller is ...

   ALORIS BXA 12-15 Quick Change Tool Post Metal Lathe South Bend Machinist. The item "ALORIS BXA 12-15 Quick Change Tool Post Metal Lathe South Bend Machinist" is in sale since Saturday, September 12, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Toolholding\Quick Change Tool Post". The seller is "nmcgsportscards26" and is located in Millbrae, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, ...

   Premium Quality Quick change Tool Post for lathes. All parts hardened and precisely ground. Main Block Size is 58 x 58 x 40 mm high with a 7/16 (11.1 mm) Stud Bore. Set comes complete with 3 standard holders + 1 Boring Vee Holder and 1 Hex Spanner. Tool capacity upto 13mm approx. Parting blade is not include in this kit. Our product is manufactured by us, we do not compromise on quality, the quality is the best you can ever get, kindly refer to the photos. We ensure the product reaches you at the earliest. The item "My Ford T37 Quick Change Toolpost 5 Pieces Set Lathe Premium ...

T 63 QUICK CHANGE TOOLPOST SET OF 5 PCS. This is Quality Made Toolpost Set is fully Hardened & Ground. Quality quick change toolpost for Harrison/colchester/Chipmasters/Bantams or similar sized. THIS QUICK CHANGE SET COMES COMPLETE WITH. Main Block 75 mmx 75mm height 63 mm. 2 X Standard Holder with (16 mm Tool Capacity). 1 x HSS Parting Blade. The item "Quick Change Toolpost T 63 For Harrison /Colchester/ Chipmasters/ Bantams 5 pcs" is in sale since Saturday, May 23, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & ...