HBM Quick Change Toolpost for Myford Lathes (inc 2 standard holders). HBM Quick Change Toolpost for Myford Lathes. Pictured on a Myford Ml10 Lathe. Including 2 Standard holders (12MM capacity). 10mm centre height when used on a myford ml/super 7. This unit will also fit Myford ML10 (giving a 6mm tool height). This unit is also easily modifyed to fit the mini lathe. Specs: main block height 32.4mm high x 7/16 bore. Simply Tap the handle to release the holders. 7/16 bore for direct Myford fitting. The holders etc are NOT compatible with dixon toolposts. The item "RDG TOOLS HBM ...

   ALORIS BXA-I INDEXABLE TOOL POST UP TO 15 SWING CNC LATHE QUICK CHANGE USA. The Aloris Indexable Tool Post allows 4 independent tool holders to be locked to the tool post simultaneously. This allows the operator to do multiple operations by means of indexing the tool post to any of the 24 locking positions. The index positioning and locking is accomplished by the same means as a turret on a CNC Lathe. This is the ultimate in productivity on Manual and CNC Lathes without indexing capabilities. Two standard Aloris Tool Holders can be mounted with no modification or you can modify some ...

   BXA QUICK CHANGE LATHE TOOL SET TOOL POST & HOLDERS CNC USA. For use on lathes with 10-15 swing (defined as the diameterthat can be turned over the bed). Precision-engineered to assure repetitive accuracy. Quickly and easily installed on any engine lathe, bench or CNC lathe for a wide range of operations from fine precision work to heavy duty cutting. Slash Your Setup Time- instant changing from one operation to another! Interchangeable with Dorian & Phase II BXA series tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts...

   AXA QUICK CHANGE LATHE TOOL SET TOOL POST & HOLDERS CNC USA. For use on lathes with up to 12 swing (defined as the diameterthat can be turned over the bed). Precision-engineered to assure repetitive accuracy. Quickly and easily installed on any engine lathe, bench or CNC lathe for a wide range of operations from fine precision work to heavy duty cutting. Slash Your Setup Time- instant changing from one operation to another! Interchangeable with Dorian & Phase II AXA series tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts...

   SHARS 14-20 CA Quick Change Tool Post Boring Turning Facing Holder #2 250-402. Piston Type Or Wedge Type Tool Posts Sets. Please see above pictures, our products are from two different manufactures. Different type of numbers and logos. They can't be used by mismatch. Round Boring Bar Shank Diameter. Set Screw Thread Size: M12x32. "V" groove holds round shank boring bars and tools as well as square tool bits. Same logo as above picture showed match this listing. If you need to speak to a sales person feel free to call. We are open Monday through Friday 8:30 to 5:00 est. The item "OUT ...

   SHARS CA Wedge Type Quick Change Tool Post 6PCS/ Set for 14-20 Lathe #444. If Phase II is suitable for your lathe center height, Shars will also fit. Includes: 250-444 tool post holder, 250-401 holder, 250-402 holder, 250-404 holder, 250-407 holder, 250-410 holder. Set Screw Thread Size: M12x32. Tool Post and Tool Holders No. Use tool bit 1/2 to 1. 250-402 Boring, Turning Tool Holder, use tool bit up to 1 and. Round shank boring bars up to. 250-404 Heavy Duty Boring Bar Holder, can use both 1 and 1-1/4 shank boring bars. 250-407 Parting Blade Tool Holder, use 7/8 high parting...

   SHARS AXA Wedge Tool Post 6-12 CNC Swing Lathe Quick Change Holder (250-111) NEW. If Phase II is suitable for your lathe center height, Shars will also fit. Please see above pictures, our products are from two different manufactures. They have different type of numbers and logos, they can't be used by mismatch. Only takes a second to change tools. Rugged construction eliminates chatter and vibration. No time wasted with shims. No tool post indexing necessary. No need to disturb basic setup. This tool post comes with a blank T-slot nut plate. Customers will need to machine the ...

   SHARS CXA Piston Tool Post 13-18 CNC Swing Lathe Quick Change Holder (250-300). If Phase II is suitable for your lathe center height, Shars will also fit. Please see above pictures, our products are from two different manufactures. They have different type of numbers and logos, they can't be used by mismatch. Only takes a second to change tools. Rugged construction eliminates chatter and vibration. No time wasted with shims. No tool post indexing necessary. No need to disturb basic setup. This tool post comes with a blank T-slot nut plate. Customers will need to machine the plate ...

   Type Quick Change Tool Post 6PCS/ S. Suitable for lathe center height 0.6 - 1.75 (top compound surface to lathe center line). 9" & 10" , Atlas 10 & 12", Delta 10 & 11" Nardini TT1000 & TT1200 and many. Includes Tool Post and Tool Holders: 250-100 Tool Post holder, 250-101 Holder, 250-102 Holder, 250-104 Holder, 250-107 Holder, 250-110 Holder. Set Screw Thread Size: M8x19. Increases production of lathe operations. Change tools quickly and easily. No time wasted with shims. Tool Post and Tool Holders No. 250-101 Turning & Tool Holder, use tool bit 3/16 to ...

   SHARS Piston Quickly Changing Tool Posts 13-18 Lathes And Tool Holder Sets 6PCS/ Set #300 CXA. Suitable for lathe center height 1.125 - 2.125 (top compound surface to lathe center line). Includes: 250-300 Tool Post, 250-301 Holder, 250- 302 Holder, 250-304 Holder, 250-307 Holder, 250-310 Holder. Set Screw Thread Size: M10x25. Increases production of lathe operations. Change tools quickly and easily. No time wasted with shims. Tool Post and Tool Holders No. Use tool bit 1/2 to 3/4. 250-302 Boring, Turning Tool Holder, use tool bit up to 3/4 an. Round shank boring bars up to. ...