Aloris Ca Wedge Style Quick Change Lathe Tool Post Complete With Wrench #2

Aloris CA Wedge Style Quick Change Lathe Tool Post Complete w/ Wrench #2. This is a bare CA quick change tool post, comes just as shown with nothing else other than the wrench. Please take a look at the pictures to judge the condition for yourself. I've verified that it works and holds a compatible tool holder securely.   

Fine Ground Multifix E Quick Change Tool Post With Ed25100 Eh30100 Holders

This E kit is not a standard model. An be used on C06230 lathe which turning diameter is from 200mm to 400mm. (8" to 16" swing lathe). It's about similar size as BXA piston type quick change tool post which is for swing 10--15 lathe. 1 X E multifix tool post and locking wrench. 3 X fine ground turning tool holders ED25100Max. Can hold 25 MM shank height tool. 1 X round tool holder EH30100. With large V notch for round shank tool. 1 X T wrench for tool holder. 1 X simple installation manual in English. Package carton size is 31X23X18CM. Net weight is 8.2KGS. Gross weight is ...

Lot Of 2 Kdk 154725 & Kdk 201984 Quick Change Tool Post Holders. Used

Lot of 2 KDK 154725 & KDK 201984 Quick Change Tool Post Holders. One of these has a little metal part chipped off, see the pic with the Yellow masking tape with an arrow pointing to the chip. See all the many pictures I have and decide for yourself. It is quite common that machining tools do sometimes get nicked and ground during work. I will try to describe whatever obvious things I notice. PLEASE MAKE SURE THAT THIS IS THE EXACT ITEM THAT YOU WANT, AND ITEMS SPECS THAT YOU WANT, BEFORE YOU.   

8pcs Quick Change Tool Post Holder Set Mini Lathe Up To 8 Oxa 250-000

   Made of Steel, not Aluminum. 8Pcs Quick Change Tool Post Holder Set Mini Lathe Up to 8 OXA 250-000. Most mini lathe use bolt mounting not T-nut mounting, If the threads of mounting bolt of this set is different with the the thread hole on our mini lathe, you can use Any proper size threads and diameter bolt of your own to mount this tool post on your mini lathe. If your little lathe is T-Nut mounting, you can use the Oversize Blank T- Nut comes with this set, just machine it to fit your lathe T slot. Wedge type have the Max. Rigidity to get the chatter free performance. The ...

A1 40position Quick Change Tool Post 11 Pc For 150-300mm Lathe 6-12 Multifix A

   A / A1 QUICK CHANGE TOOL POST - MULTIFIX 40 POSITION. A / A1 For Lathe Swing - 150mm To 300mm Mounting Bore - 20mm (10.2mm) Block Height - 54mm. Standard Holder / Turning & Facing Holder - 20mm Holding Capacity. 1 x Tool Post / Main Block (540-100) With Locking Wrench 10 x Standard Holders /. (A1D2090) - 20mm Holding Capacity. Can be used on BV20, SINO210V, D240, CQ6125 bench lathe where turning Dia. Is from 150 to 300mm (6"-12"). Cam-lock handle rigidly locks & quickly releases the tool holder. Correct height of cutting edge is easily & accurately adjusted by special ...

Mini Lathe's Quick Change Tool Post Set Ii Suits Mini & 90-115mm Centre Height

Mini Lathe's Quick Change Tool Post Set II Suits Mini & 90-115mm Centre Height Lathes- Made of Tool Steel- Hardened & Ground. Supplied complete with 2 x Standard Holders, 1 x Vee Boring Holder, 1 x Parting Tool Holder with 1 x HSS Blade & Allen Keys. Tool Post Dimensions : 60 mm Square x 40 mm High, Center Bore : 9.75 mm, Countered Bore : 15.5 mm (Depth upto 8 mm). Standard Tool holder capacity: 12mm.   

Pages